Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Walnut
Dryer vent cleaning in Walnut typically runs $149 – $289 for a full brush-out and airflow verification on a standard two-story tract home. Most jobs take 60 – 90 minutes, and we book Walnut appointments within a few days, not weeks. Lantern Chimney Sweep has worked in the Timberline, Snow Creek, and Walnut Valley developments long enough to know exactly how these 1980s – 2000s stucco homes route their dryer exhaust runs, so we come prepared for the long vertical rises and HOA-visible exterior hoods that define this area. Call (855) 341-8132 to schedule a free estimate.

Key Takeaways:
- Dryer vent cleaning in Walnut averages $149 – $289 depending on run length and access.
- Most Walnut homes have long vertical runs with multiple elbows that trap lint where short tools can’t reach.
- HOA requirements in Walnut’s master-planned tracts often mean the exterior hood must match an approved style, so we coordinate with management companies before replacing anything visible from the street.
- Missing or damaged vent screens are a recurring problem here, and roof rats and scrub-jays take advantage every spring.
- One visit covers a leading residential fire hazard, and we use Famco-compatible components on every repair.
Why Lantern Chimney Sweep Is Walnut’s Preferred Dryer Vent Cleaning Company
Walnut homeowners call us because we don’t just vacuum the first few feet and call it done. We run the brush the full length of the vent, check airflow at the exterior hood, and pull out what’s actually blocking the pipe. In two-story Mediterranean-style tracts around Snow Creek and Grand Avenue, that usually means packed lint at the top of a vertical rise where a surface-level cleaning would leave the real problem sitting there. We tell you what we found, and we can fix it, same visit.
Our work in Walnut is built around the way these homes were constructed. Builder-grade stucco exterior walls, tile roofs, and prefab fireplace flues dominate the housing stock across 91788, 91789, and 91795. Dryer vents here terminate through sidewalls or the roof rather than the foundation, and the long runs with elbows behind HOA-visible walls collect lint in ways a ranch-style home never does. We know where to look, and our customers notice the difference. Len Castorena has led Lantern Chimney Sweep with a simple standard: diagnose first, show the customer what we found, and never recommend work that isn’t visible to the person paying for it. That standard travels with us into every Walnut home.
For full-service capability across a home’s combustion and venting safety, our Dryer Vent Cleaning team treats every visit as an inspection, not a maintenance chore.
Styles & brands we work with





Our Dryer Vent Cleaning Services in Walnut
Full Dryer Vent Run Brush-Out and Vacuum
We brush from the dryer connection to the exterior hood, then vacuum the entire run with a HEPA-filtered negative-air system. In Walnut’s two-story tract homes, run lengths of 12 to 25 feet with two or three elbows are standard, and those elbows are where lint compacts. A short shop-vac whip will not reach a blockage at the top of a vertical rise off a second-floor laundry. We use rotary brushes sized for 4-inch rigid, semi-rigid, and flexible ducts, so the full run gets cleared, not just the first segment.

Exterior Hood, Screen and Vent Cover Replacement
Walnut HOAs are particular about what goes on the outside of the house. A replacement hood or screen that doesn’t match the tract’s approved style draws a compliance notice, sometimes faster than the lint buildup ever would. Before we install anything visible from the street, we coordinate with the management company or the homeowner’s HOA contact. We carry Famco-compatible hoods, screens, and covers, and we can match the common styles used in Walnut Valley, Timberline, and Snow Creek developments. If the HOA wants a specific look, we want to know that before we touch the wall.

Airflow Verification and Lint Blockage Inspection
After the cleaning we measure airflow at the exterior hood with an anemometer and document the reading. A healthy run should move air efficiently, and if it doesn’t, we tell you why. Long vertical runs, crushed duct sections, kinked flex, improper terminations, or an old flapper that no longer seals: that’s the kind of thing we identify and photograph. You get a clear picture of the vent’s condition, and you get a recommendation only if the evidence supports it. No air, no upsell, no mystery.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Walnut
We work with professional-supply brands that aren’t on the shelf at a big-box store. Lantern Chimney Sweep specifies Famco vent components for dryer exhaust repairs because they meet trade-standard performance and are compatible with the rigid and semi-rigid ductwork common in Walnut tract homes. We also source through Olympia Chimney and Copperfield supply networks, the same professional channels restoration contractors rely on. For Walnut customers, that means if we identify a damaged hood, a missing screen, or a terminated run that needs a new cap, we can typically bring the correct component the same day, professional-grade materials, not hardware-store substitutes. Our work stands behind the parts we install, and we stand behind what we tell you.
Common Dryer Vent Cleaning Problems We See in Walnut Homes
- Long vertical stucco and tile-roof runs with multiple elbows: Two-story Walnut tract homes often route dryer exhaust up through a wall or out a tile roof, creating runs of 15 to 25 feet with two or three turns. Lint compacts at the top of those vertical sections, and a surface-level cleaning leaves the real blockage behind.
- HOA exterior-visibility trap: Walnut’s master-planned developments require exterior hoods and screens to match the tract’s approved style. A homeowner who installs a generic replacement can get a compliance notice, so the fix needs to be coordinated with the management company before installation. We handle that step.
- Roof rat and scrub-jay nesting in uncapped or unscreened vents: Walnut’s hillside tracts back onto brush and open foothill terrain, and the wildlife follows. Roof rats and scrub-jays find an unscreened dryer vent hood faster than most people find the mailbox, and once inside, they pack nesting material into the run. Every spring, we pull nests out of vents that looked clean from the outside.
- Thermal-cutoff trips and two-cycle drying on second-floor laundries: When the vent can’t move air, the dryer’s thermal sensors shut it down, or the clothes come out damp after one cycle. In Walnut’s two-story homes, that’s usually a top-of-run blockage, not a broken dryer. Our verification step confirms it before you spend money on an appliance technician.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Walnut, CA
A full dryer vent brush-out and vacuum in Walnut typically runs $149 – $289. At the low end, a short, straight run on a single-story home with easy access. At the high end, a two-story tract home with a 20-foot vertical rise, a tile-roof termination, or an HOA-visible hood that needs coordination. Exterior hood, screen, or vent cover replacement adds $45 – $120 depending on the component and whether the HOA requires a specific style. Airflow verification is included in the cleaning price, not bundled as an add-on. If you live in a Walnut HOA, we’ll confirm any exterior-work requirements before we quote, so the number we give you is the number you approve. Call (855) 341-8132 for an exact quote, free estimate, no obligation.

In the Timberline tract, our tech pulled a dryer vent run on a two-story stucco home whose exterior hood had lost its screen; roof rats had entered, packed lint and nesting material into the vertical rise, and the dryer was tripping its thermal cutoff after one load. We brushed and vacuumed the full run, verified airflow at the hood, and reinstalled a screened, spring-loaded hood so the run matched the HOA’s uniform exterior look before we signed off with the management company.
That visit shows what makes Walnut different. Most Walnut dryer vent runs terminate through stucco sidewalls or the tile roof of two-story Mediterranean-style tracts rather than the foundation, so lint blockages often build at a long vertical rise with multiple elbows behind the HOA-visible wall. The same capped, screened or uncapped exterior hood that invites roof rats and scrub-jays into a prefab flue, a recurring Walnut nesting problem, also gets packed with lint. And management companies here routinely require that the exterior hood and screen be restored to a uniform look after service. We don’t install anything visible from the street without that approval. It’s how the work gets done in Walnut, and it’s why we decide before we drill.
We Also Serve Cities Near Walnut
Lantern Chimney Sweep serves Walnut and the surrounding communities. We take appointments in South San Jose Hills, Rowland Heights, West Covina, and Pomona on the same scheduling calendar, so booking a dryer vent cleaning from one of these nearby cities is just as quick as a Walnut appointment. If you’re checking HOA requirements for your tract, mention it when you call, and we’ll make sure the exterior work meets local standards.
Serving Walnut, CA — Our Local Coverage Area
We’re based in the Walnut area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Walnut
In most Walnut master-planned developments, yes, any exterior vent hood, screen, or cover replacement needs to match the tract’s approved style, and some HOAs require written approval before installation. We coordinate with your management company or HOA contact before we install anything visible from the street. If the HOA has a specific vendor style or color requirement, we need that in writing, and we’ll match it. Call (855) 341-8132 and mention your HOA, and we’ll walk you through what’s needed for your specific tract.
The most common cause in Walnut’s two-story tract homes is a lint blockage at the top of the vertical rise, usually where the vent turns twice before exiting through a stucco wall or tile roof. When air can’t move, the dryer’s moisture sensor stays damp, so the cycle runs long or shuts off early. We brush the full run, vacuum it, and verify airflow at the exterior hood, so you know the vent is moving air before you call an appliance repair company. Call (855) 341-8132 for a free estimate.
Yes, and in Walnut it happens often. Roof rats and scrub-jays enter through unscreened or damaged dryer vent hoods on stucco sidewalls, the same way they colonize uncapped prefab chimney flues. The nesting material and droppings mix with lint to create a blockage that also becomes a fire risk. We pull the nest out, clean the run, and replace or repair the hood screen so it doesn’t recur this season. Call (855) 341-8132 if you’ve heard scratching near the laundry wall.
Yes. In Walnut, many homes have decorative prefab fireplaces that see little use, but the clothes dryer runs multiple times every week, which makes the dryer vent a more active fire hazard than the fireplace. A clogged dryer vent is one of the leading causes of residential structure fires. Cleaning it is independent of fireplace use. If you haven’t had the vent cleaned in two years or more, call (855) 341-8132 for a free estimate.
We clean roof-terminated dryer vents from the roof, brushing downward through the run and vacuuming from both the roof penetration and the dryer connection to capture debris at both ends. Walnut’s tile roofs require care around the tiles, and we use ladder stabilizers and roof boards to avoid breaking or cracking tiles during access. Before any work on a roof termination, we check the roof cap or flapper condition as well as the run itself. For a quote on a tile-roof vent cleaning, call (855) 341-8132.
Get Your Dryer Vent Cleaned in Walnut – Free Estimate
If your dryer takes two cycles, your laundry room feels warm while the dryer runs, or you can’t remember the last time the vent was cleaned, now is the time. Lantern Chimney Sweep is state-licensed, insured, and led by Len Castorena, with a flat-price agreement approved before we start. We clean the full run, verify airflow, and fix what we find, all in one visit. Call (855) 341-8132 for a free estimate, and mention your Walnut neighborhood so we can tell you exactly what to expect.
Written by Len Castorena, Owner at Lantern Chimney Sweep, serving Walnut and the San Gabriel Valley.